AV/ON-12
Filled tone (2% LDPE EVA) RGB Color simulation (273, 83, 66)
- Presentation: Masterbatch
- Base Polymer: EVA
- Recommended dose: 2% LDPE
Recommended materials
- LD-PE:
- PS:
- ABS:
- PC:
- PVC rígido:
- HD-PE:
- SB:
- POM:
- PMMA:
- PVC plast.:
- PP:
- BDS:
- PA:
- EVA:
- Caucho:
Transformation methods
- Injection:
- Blow molding:
- Extrusion:
- Rotational molding:
Key:
- Not recommended
- Partially recommended
- Recommended
- Team:
Spectrophotometer Minolta CM-3700d - Measuring System:
CIELAB D65 Illuminant/10⁰ - Measurement geometry:
d/8
| Parameter | Value | Tolerance | Measuring System |
|---|---|---|---|
| Brightness (L*) | 62.90 | ±2 | CIELAB D65 Illuminant/10⁰ |
| Chromaticity coordinates (a*) | 69.86 | ±2 | |
| Chromaticity coordinates (b*) | 50.71 | ±2 | |
| Luminance difference (∆L*) | N/A | +-1,0 | |
| Saturation difference (∆C*) | N/A | +-1,0 | |
| Tone difference (∆h*) | N/A | +-1,0 | |
| Color difference (∆E*) | N/A | +-1,5 |
| Properties | Norma | Value | Units |
|---|---|---|---|
| Physical Form | – | Granular | – |
| Thermal stability (*) | – | 280 ºC | – |
| Light stability (max. 8) (*) | – | 2-4 | – |
Information about the composition
- Masterbatch does not contain: Pb, Hg, Cd, Cr (VI)
- Pigments: Contiene pigmentos inorgánicos y fluorescentes.
- Plastic support: Pigments dispersion in EVA
- Other information: Masterbatch contains CaCO3 and lubricant additives in order to improve the processing.
Legislation
The supplied product complies with the following standards and directives:
- Regulation (EC) No. 1907/2006 of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
- Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
For further information about legislative affairs (or any other queries), you can contact our Quality Department through the following email address calidad@colortec.es
Advantages of using masterbatch
- Physical Form: Pigment encapsulation reduces contamination in the manufacturing process. Besides, the absence of dust has a positive impact on the work environment.
- Dose: Unlike powder pigments, it is possible to dose automatically
- MOISTURE: Powder pigments could be highly hygroscopic and, but as masterbatches are encapsulated in plastic support, the moisture absorption is really low.
Other information
- Packaging: in 25 kg bags.
- LABELING: reference, recommended dose for application, batch number and weight.
Observations
- The product should not be stored in direct sunlight or near sources of thermal energy.
